Supply electronic components,provide globle service

The device retains an active area of 1.6mm2 per quadrant and offers a floor life rating of 168h, in accordance with J-STD-020. It provides a wide sensitivity range from 69nm to 1050nm, an 8.5µA reverse light current and a ±60-degree angle of half sensitivity. The device is AEC-Q101 qualified, RoHS-compliant, halogen-free and Vishay Green.


Typical applications include small signal detection for automotive rain/light sensors, industrial automation systems, laser beam alignment, and virtual reality.

Transceivers provide robust system-level immunity to EMC standards

03-09-2020 | Analog Devices | Semiconductors

Applications include electrical test and measurement, solar inverters, HVAC networks, industrial field buses, and building automation.

Analog Devices ADM276xE Transceivers are 500kbps, 5.7kVrms, signal isolated RS-485 transceivers that pass radiated emissions that test the EN 55032, Class B standard with margin. These transceivers provide compliancy to the RS-485 and RS-422 communication standards. The transceivers are optimised for low speed over extended cable runs and provide a maximum data rate of 500kbps. These transceivers offer an isolation barrier that gives robust system-level immunity to IEC 61000-4-x system-level Electromagnetic Compatibility (EMC) standards. The transceiver provides a receiver cable invert pin to enable quick correction of the reversed cable connection on the A and B receiver bus pins.